|
SKS-3-50/50-LxW |
|
- Alternative sizes to these listed
can be designed in cases where space is restricted or a larger
load carrying capacity is required.
- For the standard bearings listed
in these tables, the first letters of the product reference number
represent the type of bearing (eg SKS).
- The first digit signifies the
number of bearing units per metre.
- The second pair of digits (divided
by a slash) identifies the plan size of the top (5mm) pad. For
standard movements of +/- 10mm, the lower (2mm) pad is always
25mm larger in plan. So if the top pad is 75/100, the bottom
pad is 100/125. In cases where larger movements are required,
the lower pad is enlarged to accommodate these. To specify an
allowance for larger movement, insert the larger dimensions of
the 2 mm pad in the code. Hence SKS-3-75/100-LxW would be intended
for standard movements whereas SKS-3-75/100(120/125)-LxW would
be designed for larger movements (+/- 20mm) in one direction.
the expanded polystyrene filler can be made to suit the support
size. The dimensions for this are given in place of the letters
'L' and 'W'.
- Alternative sizes to these listed
can be designed in cases where space is restricted or a larger
load carrying capacity is required.
- Where the performance
of the SKS range is insufficient, we recommend that the heavy
duty SKU/R bearing is considered.
|
